Canon Inner Finisher-L1, Service Manual

Page: 29 / 128

Rear Alignment
Plate
Rear Alignment Motor (M4)
Front Alignment Plate
HP Sensor (PS4)
Rear Alignment Plate
HP Sensor (PS5)
Front Alignment Motor (M3)
Front Alignment
Plate
The relationship between operation modes and alignment positions is summarized in the following table.
Operation
Mode
Paper Width Paper Length Standard Paper Alignment Position Remarks
Non-Sort 297.0 mm or less Not defined envelope (COM10-R, Mon-
arch-R, DLR), STMTR, A5R,
B5R, EXEC-R, K16R, A5,
STMT, A4, LTR, K16, A3,
11x17, K8 Center alignment*1 *1: If the width is less
than 120.0 mm, the
alignment plate does
not reach the end of the
paper. Therefore, align-
ment is made at +8 mm
from the end of the pa-
per for the front and
rear.
More than 297.0
mm SRA3, 12x18 20 mm front of the center
position
Free size Center alignment (howev-
er, 20 mm in front of the
center position if the width
is more than 297 mm)
Shift-Sort 210.0 to 297.0
mm 173.4 to 215.9
mm A3, A4, A4R, B4, B5, 11x17,
LTR-R, LGL, LTR, 8K , 16K,
EXEC Front shift: 20 mm in front
of the center position
Rear shift: 10 mm to the
rear of the center position
Shift amount: 30 mm
Operation Mode Paper Size Alignment Position Remarks
Staple A3, B4, A4, A4R, B5, 11x17,
LGL, LTR, LTR-R, 8K, 16K, EX-
EC Front 1-point stapling: Front of the paper stack
End face at 148.5 mm in front of the center Center alignment is used for A4
and A3(paper width 297 mm).
Rear 1-point stapling: Rear of the paper stack
End face at 148.5 mm to the rear of the center Center alignment is used for A4
and A3(paper width 297 mm).
2-point stapling: Center alignment
Staple-free staple A3, B4, A4, B5, 11x17, LTR,
8K, 16K Rear of the paper stack
At 4.3 mm in the center direction from the Rear
Alignment Plate HP position. Aligned at the staple position.
Related service mode
• Adjustment of center alignment standard position:
SORTER > ADJUST > CENT-ALG
• Adjustment of alignment position at staple mode:
SORTER > ADJUST > INF-ALG3
• Adjustment of alignment position at non-staple mode:
SORTER > ADJUST > INF-ALG4
2. Technical Explanation
22