Canon Inner Finisher Additional Tray-A1, Installation Procedure

Page: 13 / 22

Chapter 1
5
1.2 Installation Procedure
1.2.1 Installation
0003-2137
1) In the case of the Finisher-Q1/R1, open the front
door [1], remove the 3 screws [2], and detach the front
cover [3].
F-1-3
2) In the case of the Saddle Finisher-Q2/R2, open the
front cover [1].
F-1-4
3) In the case of the Finisher-Q1/R1, remove the 3
screws [1], and detach the rear cover [2].
F-1-5
4) In the case of the Saddle Finisher-Q2/R2, detach
the cable cover [1], remove the 6 screws [2], and
detach the rear cover [3].
F-1-6
5) Remove the 2 screws [1], and open the upper cover
of the finisher; then, detach the upper left cover [3] as
if to pull out the claw [2].
[2]
[2]
[3]
[1]
[1]
[2]
[1]
[2]
[1]
[3]