Canon ImageRunner C2550, Printer Manual

Page: 123 / 312

UFR II Settings
3-51
3
Pr
inter Settings Menu
Gamma
Text: 1.0, 1.4
*
, 1.8, 2.2
Graphics: 1.0, 1.4
*
, 1.8, 2.2
Image: 1.0, 1.4
*
, 1.8, 2.2
The brightness of printing can be adjusted to not lose the brightest and darkest
portions of the original data. For example, this setting is made when the printout is
brighter than the original image (original photograph before being scanned,
graphics created on a monitor, etc.) or when wanting to change the brightness
before printing. The higher the value, the darker the printout. [1.4] is the value for
an uncorrected (default) state.
Settings can be applied separately for text, graphics, and image data.
NOTE
This setting is only applied if 'CMS(Matching)/Gamma' is set to [Gamma].
Paper Save
On
*
, Off
This setting specifies whether to output a blank page when software does not
send print data between End Page codes.
If [On] is selected, a blank page is not output, thus saving paper.
If [Off] is selected, a blank page is output.
Advanced Smoothing
Advanced Smoothing: Off, Smooth 1
*
, and Smooth 2
Graphics: On, Off *
Text: On * , Off
This setting smooths jagged outlines of graphics (illustrations created by
application software) and characters.
[Smooth 2] performs a higher level of smoothing than [Smooth 1]. If [Smooth 1] is
selected and the results are still not printed smoothly, select [Smooth 2].
By switching the on/off for 'Graphics' and 'Text', you can select whether to apply
smoothing to graphics or text data.
IMPORTANT
•
This setting allows you to apply smoothing to graphics data and text data.
Smoothing is not applied to image data.
•
The setting for 'Text' is invalid if 'Resolution' is set to [1200 dpi].