Canon IMAGERUNNER ADVANCE C5030, Getting Started, Page: 68 / 252

3
System Options/MEAP Applications That Require License Registration
Using the System Options That Require License Registration 3-4
Registering the License Key
This section describes how to register the license key from the touch panel display of the machine and activate the system
options.
System Manager Information (System Manager Department ID/System Manager PIN) is set by default in the machine. As a result,
administrators are required to enter a system manager department ID and system manager PIN in the Settings/Registration screen to log
in. The default settings for the system manager department ID and system manager PIN are both "7654321". These should be changed to
more suitable values. For more information on the system manager department ID and PIN, see e-Manual > Security.
1
Press → [Management Settings] → [License/Other] → [Register License].
2
Enter the license key using - (numeric keys) → press [Start].
The icons that are displayed are explained below:
[ ][ ]: Press to move the cursor.
[Backspace]: Press when you entered a wrong number. The number in front of the cursor is deleted and you can reenter the correct
number.
If the message <The value for the license key is not correct. Check the license key.> is displayed, press [OK]
→
enter the correct license
key.
If the message <The feature required for installation is not present.> is displayed, you cannot register the license key. Press [OK]
→
cancel the registration.
3
Press [OK].
The registered functions can be used only after you restart the machine (the main power switch is turned OFF, and then back
ON). (See “Main Power and Control Panel Power,” on p. 1-14.)