Canon IMAGERUNNER ADVANCE C5030, Getting Started, Page: 191 / 252

11
Before Using the Fax Function
Fax Settings
11-7
Registering the Unit's Name
Your name or company's name must be registered as the unit's name (a department name is optional).
The registered unit name can be displayed on the touch panel display of the receiving party's machine and/or printed at the
top of the fax documents that you send as the sender's information. Some fax models also display sender information on the
touch panel display during transmission.
For this setting, the FAX Board is required.
It is necessary to register a separate Unit Name if you have an additional line. See e-Manual > Settings/Registration.
If the FAX Board installed, the unit name can be printed in the TX Terminal ID.
1
Press → [Function Settings] → [Send] → [Fax Settings] → [Set Line] → [Line 1]
→ [Register Unit Name] .
2
Enter a name → press [OK] .
•
•
•