manualshive.com logo in svg

Canon IMAGERUNNER ADVANCE C5030, Getting Started, Page: 27 / 252

Share
Download
Canon IMAGERUNNER ADVANCE C5030 Getting Started Download Page 27

xxv

Do not place your hands, hair, clothing, etc ., near the exit and feed rollers . Even if the machine is not in operation, your hands, 

hair, or clothing may get caught in the rollers, which may result in personal injury or damage if the machine suddenly starts 

printing .
Do not place your hands in the part of the tray where stapling is performed (near the rollers) when a finisher is attached, as 

this may result in personal injury .

Staple Finisher-C1/Booklet Finisher-C1

Inner Finisher-A1

The laser beam can be harmful to human bodies . Since radiation emitted inside the product is completely confined within 

protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation . 

Read the following remarks and instructions for safety .
Never open covers other than those instructed in the manuals for this machine .
Do not remove the following caution label which is attached to the machine . If the label has been removed, contact your local 

authorized Canon dealer .

If the laser beam escapes from the machine, exposure may cause serious damage to your eyes .
Controlling, adjusting, or operating the machine in ways not mentioned in the manuals for this machine may cause 

dangerous radiation to escape from the machine .

•

•

•

•

•

•

•

Summary of Contents for IMAGERUNNER ADVANCE C5030





























































































































































































































































Reviews:

No comments