manualshive.com logo in svg

Canon IMAGERUNNER ADVANCE C5030, Getting Started, Page: 18 / 252

Share
Download
Canon IMAGERUNNER ADVANCE C5030 Getting Started Download Page 18

xvi

Legal Notices

Product Name

Safety regulations require the product's name to be registered. In some regions where this product is sold, the following 

name(s) in parenthesis may be registered instead.

imageRUNNER ADVANCE C5051/C5051i, imageRUNNER ADVANCE C5045/C5045i (F154100)
imageRUNNER ADVANCE C5035/C5035i, imageRUNNER ADVANCE C5030/C5030i (F154300)

CE

This CE Marking shows compliance of this equipment with Directive 2006/95/EC and Directive 

2004/108/EC.

EMC Directive

This equipment conforms with the essential requirements of EC Directive 2004/108/EC. We declare that this product conforms 
with the EMC requirements of EC Directive 2004/108/EC at nominal mains input 230V, 50Hz although the rated input of the 
product is 220V-240V, 50/60Hz.
Use of shielded cable is necessary to comply with the technical requirements of EMC Directive.

Laser Safety

This Product is certified as a Class I laser product under IEC60825-1:1993 and EN60825-1:1994. This means that the product 
does not produce hazardous laser radiation.
Since radiation emitted inside the product is completely confined within protective housings and external covers, the laser 
beam cannot escape from the machine during any phase of user operation.
Do not remove protective housings or external covers, except as directed by the equipment's manual.

-
-

Summary of Contents for IMAGERUNNER ADVANCE C5030





























































































































































































































































Reviews:

No comments