manualshive.com logo in svg

Canon imageRUNNER ADVANCE 9070 PRO series, Service Manual Digest, Page: 81 / 874

Share
Download
Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest Download Page 81

3-55

3

E 

code

Detailed 

code

Occurance 

area

Items

Description

E025 -0300

-05

Title

Toner bottle motor lock (C) error

Description 

of detection

Overcurrent of the toner container drive motor was 

detected.

Measures

1. Check whether a toner container of a different model is 

not installed.

If it is installed, replace it with a correct one.

1-1. Open the toner container installation inlet 

cover.

1-2. Manually turn the container in an 

counterclockwise direction until it is fully turned.

1-3. Rotate the toner container in an 

counterclockwise direction using a toner 

container removing tool.

1-4. The toner container is placed at the position 

where it can be removed. Remove the toner 

container.

2. Check the connection of the toner container drive 

motor (M7/M10/M13/M16). (Check whether the wire is 

not caught by parts.)

3. Replace the toner container drive motor.

4. Replace the toner container tray unit (when this error 

occurred at rotation of the toner container).

5. Replace the hopper unit.

E025 -0302

-05

Title

Block supply timeout (C) error

Description 

of detection

The toner supply screw rotation sensor cannot detect 

rotation of the screw.

Measures

1. Check the connection between the hopper/stirring 

supply motor (M15) and the hopper driver PCB.

Motor side: J7102, J8108 PCB side: J1350

2. Check the connection between the toner feed screw 

rotation sensor (PS18) and the hopper driver PCB.

Sensor side: J7420, J8108 PCB side: J1350

3. Replace the hopper/stirring supply motor.

4. Clean and replace the toner feed screw rotation 

sensor.

5. Replace the toner supply pipe unit.

6. Replace the hopper unit.

CAUTION:

Remedies 5 and 6 are taken when the motor is 

overloaded due to toner adhesion in the unit or gear 

interlocking failure, etc. Since it is difficult to identify the 

cause, it is recommended to replace the unit.

E 

code

Detailed 

code

Occurance 

area

Items

Description

E025 -0310

-05

Title

Toner container sealing/release holder shift cam HP 

sensor timeout (C) error

Description 

of detection

HP sensor of release holder shift cam cannot detect 

within specified period of time.

Measures

1. Check the connection of the toner container drive 

motor (M16) harness. (Check whether the wire is 

not caught by parts.) Check the connection with the 

hopper driver PCB.

Motor side: J7106 PCB side: J1370

2. Check the connection between the release holder shift 

cam HP sensor (PS17) and the hopper driver PCB.

Sensor side: J7129, J8108 PCB side: J1350

3. Replace the toner container drive motor.

4. Clean and replace the release holder shift cam HP 

sensor.

5. Replace the hopper unit.

CAUTION:

As for Remedy 5, since it is difficult to identify the cause, 

it is recommended to replace the unit.

NOTE: After performing the above remedy work, go 

through the following to clear the error: COPIER> 

FUNCTION> CLEAR> ERR

E025 -0320

-05

Title

Toner container/toner container inserting inlet phase (C) 

error

Description 

of detection

When the power was turned on, it was detected that the 

toner container cap was opened (the release holder shift 

cam phase sensor was protected against light) AND the 

toner container inserting inlet cover was opened (the 

toner container inserting inlet cover open/close sensor 

was transmissive).

Measures

1. Close the toner container inserting inlet cover and turn 

OFF/ON the power.

2. Check the connection between the toner container 

inserting inlet cover open/close sensor (PS16) and 

the hopper driver PCB. (Connection of the connector, 

Shorting, Wire caught by parts)

Sensor side: J7128, J8115 PCB side: J1360

3. Check the connection between the release holder shift 

cam phase sensor (PS82) and the hopper driver PCB. 

(Connection of the connector, Shorting, Wire caught by 

parts)

Sensor side: J7150 PCB side: J1390

4. Replace the toner container inserting inlet cover open/

close sensor.

Summary of Contents for imageRUNNER ADVANCE 9070 PRO series











































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments