manualshive.com logo in svg

Canon imageRUNNER ADVANCE 9070 PRO series, Service Manual Digest, Page: 171 / 874

Share
Download
Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest Download Page 171

3-145

3

E 

code

Detailed 

code

Occurance 

area

Items

Description

E746 -0022

-00

Title

Image analysis board version is invalid

Description 

of detection

Image analysis board version is invalid

Measures

1. Upgrading of the image analysis board software

2. Image analysis board replacement

E746 -0023

-00

Title

No response from image analysis board

Description 

of detection

No response from image analysis board

Measures

1. Connection check of the image analysis board

2. Image analysis board replacement

E746 -0024

-00

Title

Image analysis board operation abnormality

Description 

of detection

Image analysis board operation abnormality

Measures

1. Connection check of the image analysis board

2. Image analysis board replacement

E746 -0031

-00

Title

Hardware error (TPM)

Description 

of detection

Hardware error (TPM)

Measures

1. TPM board non-installation

2. Installation of TPM board from other units

3. TPM chip broken

E746 -0032

-00

Title

Error in engine ID of SoftID

Description 

of detection

Mismatched data in TPM 

Measures

Format the system.

Format the HDD using SST or USB memory, and 

download the system software. For details, see “Chapter 

6: Upgrading”. For your reference, the method using USB 

memory is described below.

1. Prepare the USB memory which system software was 

registered.

2. Execute the following service mode: 

COPIER>FUNCTION>SYSTEM>DOWNLOAD to 

enter the download mode.

3. Insert the USB memory to the equipment.

4. Execute [4]: Format HDD in the main menu.

After formatting is completed, the machine reboots 

automatically and starts with the download mode.

5. Execute [1]: Upgrade (Auto) in the main menu.

System software is downloaded and the machine 

restarts automatically.

E 

code

Detailed 

code

Occurance 

area

Items

Description

E746 -0033

-00

Title

Error in engine ID of SoftID

Description 

of detection

Error that can be recovered

Measures

When the TPM key was backed up, it can be restored.

1. Connect the USB memory which stores the TPM key.

2. Go to Management Settings > Data Management > 

TPM Settings, and then click “Restore TPM Key”. 

3. Enter the password set at backup operation.

4. When the restoration completion screen is displayed, 

click “OK”. Remove the USB memory, and turn OFF 

and then ON the main power.

When the TPM key was not backed up, formatting the 

system is required.

Format the HDD using SST or USB memory, and 

download the system software. For details, see “Chapter 

6: Upgrading”. For your reference, the method using USB 

memory is described below.

1. Prepare the USB memory which system software was 

registered.

2. Execute the following service mode: 

COPIER>FUNCTION>SYSTEM>DOWNLOAD to 

enter the download mode.

3. Insert the USB memory to the equipment.

4. Execute [4]: Format HDD in the main menu.

After formatting is completed, the machine reboots 

automatically and starts with the download mode.

5. Execute [1]: Upgrade (Auto) in the main menu.

System software is downloaded and the machine 

restarts automatically.

E746 -0034

-00

Title

Error occurred; but possible for automatic system 

restoration (TPM)

Description 

of detection

Error occurred; but possible for automatic system 

restoration (TPM)

Measures

Discrepancy of the key occurred. But restoration is 

possible when reboot.

Power cycle (Power OFF/ON)

E747 -7f00

-00

Title

Bypass board is not connected

Description 

of detection

Bypass board is not connected

Measures

Bypass board is not connected

E747 -ff01

-00

Title

DDR - SDRAM (P) is not connected

Description 

of detection

DDR - SDRAM (P) is not connected

Measures

DDR - SDRAM (P) is not connected

Summary of Contents for imageRUNNER ADVANCE 9070 PRO series











































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments