manualshive.com logo in svg

Canon imageRUNNER ADVANCE 9070 PRO series, Service Manual Digest, Page: 475 / 874

Share
Download
Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest Download Page 475

5-247

5

COPIER> ADJUST> FEED-ADJ

REG-MFS

Rgst start tmg:MP Tray,Coated,1/3,1/2SPD

Lv.1 Details

To adjust the top margin by changing the timing to turn ON the 

Registration Motor when feeding coated paper at 1/3 speed from the 

Multi-purpose Tray in iR-ADV C9xxx.

As the value is incremented by 1, the margin on the left edge of 

paper is increased by 0.1 mm. 

+: Top margin becomes smaller (An image moves upward.)

-: Left margin becomes larger (An image moves downward.)

When Productivity Priority mode is selected in user mode, timing to 

turn ON at 1/2 speed is changed and the margin is adjusted.

Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and 

press OK key.

Display/adj/set range

-50 to 50

Unit

0.1 mm

Related user mode

Function Settings > Common > Print Settings > Coated Productivity/

Image Quality Priority

PFIX-SPD

Adj of Pre-fix Feed Motor speed

Lv.2 Details

To adjust the speed of the Pre-fixing Feed Motor.

As the value is incremented by 1, the speed is increased by 0.1%.

+: The speed is increased.

-: The speed is decreased.

Increase the value (speed) if a jam occurs as the result that the 

trailing edge of thin paper or recycled paper winds around the 

Secondary Transfer Outer Roller.

If the value is too large, the arch between the pre-fixing feed and 

fixing processes becomes too large, and consequently an image 

failure and/or jam might occur.

Use case

When the trailing edge of thin paper or recycled paper winds around 

the Secondary Transfer Outer Roller, and a jam occurs

Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and 

press OK key.

Display/adj/set range

-50 to 50

Unit

0.10%

COPIER> ADJUST> FEED-ADJ

EXT-SPD

Adj of Delivery Motor speed

Lv.2 Details

To adjust the speed of the Delivery Motor.

The rotation speed of the Outer Delivery Roller changes in the case 

of the straight delivery and duplex mode.

As the value is incremented by 1, the speed is increased by 0.5%.

+: The speed is increased.

-: The speed is decreased.

If the value is too large, paper is pulled by both the delivery side and 

fixing side, and consequently noise might occur and/or the motor 

might become out of sync.

If the value is too small, arch is created between the Outer Delivery 

Roller and Fixing Assembly, and consequently a jam due to paper 

bending might occur.

Use case

•  When uneven gloss occurs

•  When noise is generated from the Outer Delivery Drive Assembly

Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and 

press OK key.

Display/adj/set range

-5 to 5

Unit

0.50%

Summary of Contents for imageRUNNER ADVANCE 9070 PRO series











































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments