Canon imageRUNNER ADVANCE 9070 PRO series, Service Manual Digest, Page: 166 / 874

3
3-140
■ E604 to E753
E
code
Detailed
code
Occurance
area
Items Description
E604 -1024 -00 Title Lack of memory
Description
of detection
Lack of memory (1,024MB required)
Measures Add the DDR2-SDRAM
E611 -0000 -00 Title Re-reboot due to failures such as SRAM damage when
executing the power shutdown safeguard transmission
job
Description
of detection
SRAM data is damaged and stored job data cannot be
read. If this causes the repeated reboot execution after
recovery from power shutdown, a transmission is also
repeated. Therefore “E code” is displayed.
Measures Execute SRAM clear and delete power shutdown
safeguard job
E674 -0001 -00 Title FAX is abnormal
Description
of detection
Communication error with the FAX board
Measures 1. Cable connection check
2. FAX board replacement
3. Main controller board replacement
E674 -0004 -00 Title FAX is abnormal
Description
of detection
Modem IC access is abnormal
Measures 1. Cable connection check
2. FAX board replacement
3. Main controller board replacement
E674 -0008 -00 Title FAX is abnormal
Description
of detection
Port IC access is abnormal
Measures 1. Cable connection check
2. FAX board replacement
3. Main controller board replacement
E674 -000C -00 Title FAX is abnormal
Description
of detection
Modem IC/ port IC access is abnormal
Measures 1. Cable connection check
2. FAX board replacement
3. Main controller board replacement
E674 -0010 -00 Title FAX is abnormal
Description
of detection
FAX is abnormal
Measures Main controller board replacement
E
code
Detailed
code
Occurance
area
Items Description
E674 -0011 -00 Title FAX is abnormal
Description
of detection
FAX is abnormal
Measures Main controller board replacement
E674 -0030 -00 Title FAX is abnormal
Description
of detection
Check sum error
Measures System software download for 2 line FAX
E677 -0001 -00 Title Print server failure
Description
of detection
Abnormality detected on the exhaust fan operation of
printer server
Measures 1. Check supplying power to the exhaust fan
2. Exhaust fan replacement
E677 -0003 -00 Title Print server failure
Description
of detection
Abnormality is detected during configuration check in
start up
Measures 1. Cable connection check
2. Reinstallation system
E677 -0004 -00 Title Print server failure
Description
of detection
Abnormality detected on the CPU fan operation of printer
server
Measures 1. Check supplying power to the CPU fan
2. CPU fan replacement
E677 -0010 -00 Title Print server failure
Description
of detection
Unsupported print server is connected
Measures Change for regular print server
E677 -0080 -00 Title Print server failure
Description
of detection
Communication error in start-up
Measures 1. Cable connection check
2. Reinstallation system
E710 -0001 -00 Title Printer IPC error
Description
of detection
In case that IPC communication IC in the printer engine
detected a failure when turning power ON
Measures Check the cable.
E711 -0001 -00 Title IPC communication is abnormal
Description
of detection
When 4 or more error occurrence is set to the error
register in IPC chip within 1.5 seconds.
Measures Check the cable.
E711 -0001 -05 Title IPC communication failure
Description
of detection
Occurrence of an error was set in the error resistor of the
IPC chip more than four times in 1.5 seconds.
Measures Check the cable.