Canon imageRUNNER 2545i, Reference Manual

Page: 47 / 264

Loading Paper in the Stack Bypass 2-22
Basic O
p
er
ations
2
•
Rolled or curled paper must be straightened out prior to use so that it can be fed
smoothly through the stack bypass (allowable amount of curling: less than 10 mm for
normal paper and less than 5 mm for heavyweight paper).
•
The stack bypass may not accept paper that has absorbed moisture.
•
Do not load a mixture of different paper sizes and types.
•
Make sure that the paper type setting is correct. An incorrect paper type setting may
adversely affect the image quality, damage the fixing unit, and cause paper jams.
•
Feed label sheets one sheet at a time, and remove each sheet as it is delivered to the
output tray. Loading several label sheets together may cause paper jams.
•
Loading multiple sheets of heavyweight paper in the stack bypass may result in a
paper jam. In this case, load only one sheet at a time.
•
When printing on envelopes, empty the output tray once 10 envelopes have
accumulated in the tray.
•
Envelopes may become creased in the printing process.
NOTE
For high-quality printouts, use paper recommended by Canon.
1
Open the stack bypass.
If the paper size/type you are going to load
in the stack bypass differs from the default
paper size/type set for the stack bypass,
disable the default paper size/type
settings. (See “Standard Paper for the
Stack Bypass,” on p. 3-17.)
If you are loading large size paper, pull out
the auxiliary tray and extend the tray
extension.
2
Adjust the slide guides to match
the size of the paper.
Auxiliary Tray Tray Extension
Slide Guides