Canon imageRUNNER 2545i, Reference Manual

Page: 116 / 264

Envelope Feeder Attachment-D1 4-11
O
p
ti
ona
l Eq
uip
m
en
t
4
Envelope Feeder Attachment-D1
If you need to print on a number of envelopes, the stack bypass may not be large
enough in capacity. In such a case, attach the Envelope Feeder Attachment-D1 to
Paper Drawer 2.
IMPORTANT
•
The Envelope Feeder Attachment-D1 can only be attached to Paper Drawer 2
(optional for the imageRUNNER 2520i/2520).
•
The maximum number of envelopes that can be loaded is about 50. This number may
vary depending on the envelope type and user operating conditions.
NOTE
•
The Envelope Feeder Attachment-D1 can hold the following types of envelopes:
- No.10 (COM10)
- ISO-B5
- Monarch
- ISO-C5
- DL
•
For instructions on how to use the Envelope Feeder Attachment-D1, see “Envelope
Feeder Attachment-D1,” on p. 5-8.
a
Side Guide
Use the side guide of the paper drawer to align
the length of the envelopes being loaded.
b
Envelope Receptacle
The Envelope Receptacle holds the envelopes
from above.
c
Back Width Guide
Fix this guide in place using the provided screws
to match the width of the envelopes.
d
Front Width Guide
Fix this guide in place using the provided screws
to match the width of the envelopes.
e
Size Switch
Select either ‘1’ or ‘2’ for the envelope type.