Canon imageRUNNER 2520, User Manual, Page: 33 / 582

Installation Location and Handling 1-4
Mac
h
ine Installation
1
Select a Safe Power Supply
■
Avoid locations where a considerable amount of dust accumulates.
■
Avoid locations near volatile or flammable materials, such as alcohol or
paint thinner.
■
Avoid installing the machine near computers or other precision electronic
equipment.
Electrical interference and vibrations generated by the machine during printing can
adversely affect the operation of such equipment.
■
Avoid installing the machine near televisions, radios, or similar electronic
equipment.
The machine may interfere with sound and picture signal reception. Insert the power plug
into a dedicated power outlet, and maintain as much space as possible between the
machine and other electronic equipment.
■
Do not remove the machine’s leveling feet.
Do not remove the machine’s leveling feet after the machine has been installed. If you put
weight on the front of the machine while the drawers or units within the machine are pulled
out, the machine may fall forward. To prevent this from happening, make sure that the
machine’s leveling feet are in place.
■
Plug the machine into a standard 220 - 240 V AC, three-wire grounded
outlet.
■
Make sure that the power supply for the machine is safe, and has a steady
voltage.
■
Do not connect other electrical equipment to the same power outlet to
which the machine is connected.
■
Do not connect the power cord to a multiplug power strip, as this may
cause a fire or electrical shock.