Canon imageRunner 2204F, User Manual, Page: 462 / 652

<Menu> <Fax Settings> <TX Function Settings> <Initialize Default Settings> <Yes>
RX Function Settings
Specify settings for receiving faxes.
ECM RX
Enable or disable error correction mode (ECM). ECM checks for fax data errors and corrects them. To reduce
errors on sent faxes, see ECM TX(P. 450) .
Off
On
● ECM must be enabled on both the machine and the other fax device because error check is
performed on both the sending and receiving devices.
● Even when ECM is enabled, errors may occur due to telephone line conditions.
● It may take a longer time than usual to process data when ECM is enabled because the error check
and corrections are performed while the data is transmitted.
<Menu> <Fax Settings> <RX Function Settings> <ECM RX> <On>
Incoming Ring
*2
Specify settings for sounding a ring to notify you of incoming faxes. This feature is only available when <Auto>
or <Fax/Tel (Auto Switch)> is selected for the receive mode. Specify how many times the incoming call rings
when the machine receives a fax call. You can also disable the settings to prevent the incoming call from
ringing.
Off
On
1 to 2 to 99 (times)
If you use this feature in the <Auto> mode, you need to connect your telephone to the machine
beforehand.
Setting Menu List
454