Canon imageRunner 2204F, User Manual, Page: 233 / 652

When placing documents in the feeder in step 1
When scanning is complete, the scanned document is saved to a folder on a computer or forwarded to an
application. Configuring Storing Settings(P. 233) Specifying External Applications to Forward
Scanned Data(P. 235)
When placing documents on the platen glass in step 1
If the screen shown below is displayed, you can continue scanning documents (When you can only scan one
page at a time, such as when the JPEG format is specified, this screen is not displayed.)
1
If there are additional pages of documents to be scanned, place the next document on the platen glass,
and click [Next].
● Repeat this step until you finish scanning all of the pages.
● When there is only one page to be scanned, proceed to the next step.
2
Click [Finish].
● When scanning is complete, the scanned document is saved to a folder on a computer or forwarded
to an application. Configuring Storing Settings(P. 233) Specifying External Applications to
Forward Scanned Data(P. 235)
If the scanning results are not achieved
If the expected scanning results are not achieved, for example, if the image is too dark or the color tone is
different from that in the original, you can configure advanced scan settings with ScanGear MF. Place the
document again, select the [Display the Scanner Driver] check box on the screen in step 4, and click [Start] to
start ScanGear MF.
Configuring Scan Settings in Simple Mode(P. 240)
Configuring Scan Settings in Advanced Mode(P. 243)
◼
Previewing Scanned Images Before Specifying File Format and Saving
You can preview the scanned images before specifying the file format and save destination. This procedure is not
available when [OCR] is selected in step 3. Place the document, start MF Toolbox, and proceed with this procedure.
1
Select the scan type.
● Click an icon other than the [OCR] icon.
Using the Machine as a Scanner
225