Canon imageRunner 2204F, User Manual, Page: 274 / 652

If you select the [Use AirPrint] check box
The following items are also set to <On> automatically.
● <mDNS Settings> for IPv4 and IPv6 Configuring DNS(P. 344)
● <Use HTTP> Disabling HTTP Communication (imageRUNNER 2204F / 2204N / 2004N)(P. 394)
● <Use IPP Printing> under <IPP Print Settings> Changing the Setting of Functions Available with
AirPrint(P. 266)
● <Use Network Link Scan> Changing the Setting of Functions Available with AirPrint(P. 266)
If you change [Printer Name]
● If you change [Printer Name] that you have once specified, you may be unable to print any more from the
Mac that has been able to be used for printing so far. This phenomenon occurs because <mDNS Name>
( Configuring DNS(P. 344) ) of IPv4 is also changed automatically. In this case, add the machine to the
Mac again.
6
Restart the machine.
● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
◼
Changing the Setting of Functions Available with AirPrint
If you want to disable functions that you are not going to use with AirPrint or encrypt communications, configure the
necessary setting using the operation panel.
Changing Print and Fax Settings
To perform printing or fax sending with AirPrint, IPP protocol is used.
Turning the function On/Off
You can specify whether to perform printing and fax sending with AirPrint. The factory default setting is [On].
Log on to the Remote UI in System Manager Mode ( Starting Remote UI(P. 399) )
[Settings/Registration] [Network Settings] [TCP/IP Settings] [IPP Print Settings]
[Edit...] clear or select the [Use IPP Printing] check box [OK]
Changing the TLS setting
You can specify whether to encrypt communications using TLS when performing printing or sending faxes with
AirPrint. The factory default setting is [On].
● When the machine is connected to a Mac via USB, set [Use TLS] to [On].
Log on to the Remote UI in System Manager Mode ( Starting Remote UI(P. 399) )
[Settings/Registration] [Network Settings] [TCP/IP Settings] [IPP Print Settings]
[Edit...] clear or select the [Use TLS] check box [OK]
Linking with Mobile Devices (imageRUNNER 2204F / 2204N / 2004N)
266