Canon imagePROGRAF iPF6300S, Basic Manual

Page: 7 / 52

7
Troubleshooting
Phenomenon Cause Corrective Action
1.
2.
When printing on CAD Tracing Paper or other film-
based media, choose a VacuumStrngth setting of
Standard , Strong , or Strongest in the Control Panel
menu. If rubbing still occurs, in the Control Panel
menu, use a higher Head Height setting.
Straighten out the wrinkles or curls and reload the
paper. Do not use paper that has been printed on
previously.
Make sure the same type of paper is specified on the
printer as in the printer driver.
Make sure the same paper type is specified in the
printer driver as on the printer.
Press the Stop button and stop printing.
Change the type of paper in the printer driver and
try printing again.
If this function is not needed, set CutDustReduct. to
Off in the Control Panel menu.
Clean the Ejection Guide .
In the Control Panel menu, set Head Height to
Automatic .
When printing on Heavyweight Coated Paper or
other paper-based media, choose a VacuumStrngth
setting of Strong or Strongest in the Control Panel
menu. If rubbing still occurs, in the Control Panel
menu, use a higher Head Height setting.
The edges of the paper are dirty Open the Top Cover and clean the Platen . The Platen has become dirty after
borderless printing or printing on
small paper.
The paper is wrinkled or warped.
The type of paper as specified on
the printer does not match the type
specified in the printer driver.
A cut line is printed because
CutDustReduct. is On in the
Control Panel menu to reduce
cutting dust.
The Ejection Guide is soiled.
The Printhead is set too low in the
Control Panel menu.
You are printing on heavyweight
paper or paper that curls or
wrinkles easily after absorbing ink.
( → , If Paper is Soiled)
( → "Changing the Type of Paper," User's Guide)
( → , Loading Rolls in the Printer)
( → , Loading Sheets in the Printer)
( → , Menu Map)
( → "Troubleshooting Paper Abrasion and Blurry
Images (Head Height)," User's Guide)
( → "Adjusting the Vacuum Strength (VacuumStrngth),"
User's Guide)
(
→ "Troubleshooting Paper Abrasion and Blurry
Images (Head Height)," User's Guide)
( → "Adjusting the Vacuum Strength (VacuumStrngth),"
User's Guide)
(
→ "Troubleshooting Paper Abrasion and Blurry
Images (Head Height)," User's Guide)
( → "Cleaning the Printer Exterior," User's Guide)