36
Error Messages
Error Message
Cause
Corrective Action
This paper cannot be used.
Paper that is too large for the
printer has been loaded.
Press the
OK
button and load paper of the correct
size.
Paper that is too small for the
printer has been loaded.
Press the
OK
button and load paper of the correct
size.
Paper has been loaded that is too
small to print the test pattern for
printhead adjustment or nozzle
checking.
Press the
OK
button and load unused paper A4/Letter
(vertical) or larger. More than one sheet may be
required depending on the adjustment.
(
→
"Paper Sizes," User's Guide)
(
→
"Paper Sizes," User's Guide)
Manual printing is selected, but
a roll is loaded.
A print job for printing on sheets
was sent when a roll is loaded.
Press
▲
or
▼
to select
Remove Roll Paper
, and
then press the
OK
button to stop printing.
1.
After removing the roll, load and print on a sheet of
the type and size of paper you have specified in the
printer driver.
2.
(
→
, Removing the Roll from the Printer)
(
→
"Loading and Printing on Sheets," User's Guide)
Manual printing is selected.
You have attempted to print on a
sheet, but no sheet is loaded.
Press
▲
or
▼
to select
Load Paper
, and then press
the
OK
button. Load a sheet, and then print.
Press
▲
or
▼
and select
Stop Printing
or press the
Stop
button to stop printing.
(
→
"Loading and Printing on Sheets," User's Guide)
Cannot print as specified.
The loaded paper is too small.
Replace the paper with paper of A4/Letter (vertical)
size or larger as follows.
Press
▲
or
▼
to select
Stop Printing
, and then press
the
OK
button to stop printing.
Press
▲
or
▼
to select
Change Paper
, press the
OK
button, and remove the paper.
1.
Switch to paper A4/Letter (vertical) or larger.
2.
(
→
, Removing Sheets)
(
→
"Loading and Printing on Sheets," User's Guide)
The printer will resume printing.
Press
▲
or
▼
to select
Stop Printing
, and then press
the
OK
button to stop printing.
(When you are attempting to print
a test print sheet or other printer
status information.)
Please calibrate using above
paper.
It has become the time for
prompting the execution of color
calibration.
Execute color calibration.
This is displayed when paper is
loaded in the printer and
Prompt
Execution
is set to
On
on the
Control Panel
menu.
Set
Prompt Execution
to
Off
on the
Control Panel
menu.
(
→
, Menu Map)
(
→
"Using Color Calibration for Color Adjustment,"
User's Guide)
Summary of Contents for imagePROGRAF iPF6300S
Page 51: ......
