Canon imagePress C910 Customer Expectation Document Download | Manualshive

Page: 6 / 129

background image

imagePRESS C910/C810/C710 Customer Expectations Document

Version 5

imagePRESS C910/C810/C710 Customer Expectations Document

Page 6

IMPORTANT

The purpose of this Customer Expectations Document is to explain the current
features and capabilities of the imagePRESS C910/C810/C710, and provide
customers information about what to expect before purchasing the machine.

The information included in this document has been pulled from various sources,
including product reference guides, service guides, and user manuals.
Specifications and other information contained herein may vary slightly, and in a
non-material way, from actual device values, including those found in advertising
and other printed matter. Part numbers, yield information, and specifications are
subject to change without notice. Accordingly, the latest specifications for the
machine may not be found in this document. As new information becomes
available, this document will be revised. Canon authorized dealers can access the
latest revision of this document from the Download Center page on the e-Support
Web site (

support.cusa.canon.com

DISCLAIMER

NEITHER CANON NOR ITS SUPPLIERS NOR ANY AUTHORIZED SERVICE
PROVIDER SHALL BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE
(UNLESS CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON
OR ANY AUTHORIZED SERVICE PROVIDER), LOSS OF REVENUE OR PROFIT,
FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, EXPENDITURES FOR
SUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR CORRUPTION OF DATA,
INCLUDING, WITHOUT LIMITATION, DATA STORED ON THE PRODUCT’S HARD
DISK DRIVE, STORAGE CHARGES OR OTHER SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO
USE THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE
CLAIM IS BASED AND EVEN IF CANON OR ITS SUPPLIERS OR ANY
AUTHORIZED SERVICE PROVIDER HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.  NOR SHALL RECOVERY OF ANY KIND AGAINST CANON
OR ITS SUPPLIERS OR ANY AUTHORIZED SERVICE PROVIDER BE GREATER IN
AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT CAUSING THE
ALLEGED DAMAGE.  WITHOUT LIMITING THE FOREGOING, THE PURCHASER
ASSUMES ALL RISKS AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO
PERSONS AND THE PROPERTY OF THE PURCHASER OR OTHERS ARISING
OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE THE PRODUCT
NOT  CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR
ANY AUTHORIZED SERVICE PROVIDER.

Copyright 2019 by Canon U.S.A., Inc. All rights reserved.

Océ, PRISMAsync, PRISMAdirect, PRISMAprepare, and DPLink are registered trademarks of

Océ-Technologies B.V.

Product and company names used herein are, or may be, the registered trademarks or trademarks of their respective
owners.

«
...
4
5
6
7
8
...
»

Summary of Contents for imagePress C910


































































































































Reviews:

No comments

Related manuals for imagePress C910

Color imageCLASS MF8580Cdw

Brand: Canon Pages: 750

ImageCLASS 2300

Brand: Canon Pages: 8

Color imageCLASS MF8580Cdw

Brand: Canon Pages: 750

Color imageCLASS 8180c

Brand: Canon Pages: 95

Brand: Canon Pages: 4

Brand: Canon Pages: 49

ImageCLASS 2300

Brand: Canon Pages: 156

Brand: Canon Pages: 193

Brand: QMS Pages: 24

imageCLASS D1120

Brand: Canon Pages: 36

ImageCLASS 2300

Brand: Canon Pages: 44

Brand: Canon Pages: 66

Brand: Samsung Pages: 82

Brand: Samsung Pages: 2

Brand: OKIDATA Pages: 182

7400DT - Phaser Color LED Printer

Brand: Xerox Pages: 20

Brand: ABLE Pages: 42

Brand: AstroJet Pages: 97

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands