imagePRESS C910/C810/C710 Customer Expectations Document
Version 5
imagePRESS C910/C810/C710 Customer Expectations Document
Page 92
6.36 Plockmatic Multi-Purpose Stacker
The Plockmatic Multi-Purpose Stacker will be available later.
Item
Specification
Supported Devices
imagePRESS C910
imagePRESS C810
Required Equipment
High Capacity Stacker-H1
OR
DFD Adapter and Finisher Bridge Unit
Finisher Bridge Height Kit 1002-A1
Maximum Stack Height
For sheets less than 25.6” (600 mm), maximum stack height is
approximately 11.8” (300 mm)
For sheets longer than 25.6” (600 mm), maximum stack height is
approximately 5.3” (135 mm)
Maximum Stack Weight
Approximately 88.2 lb (40 kg)
Supported Paper Size
8.5” x 11” (long edge), 9” x 12” (long edge), 11” x 17”, 12” x 18”, Custom
Size (8.27” x 11” (210 mm x 280 mm) to 13” x 30”(330 mm x 762 mm))
Supported Paper
Weight
39 lb bond to 150 lb cover (148 g/m
2
to 400 g/m
2
)
Supported Paper Types
Plain, Coated, Recycled, and Pre-punched
Maximum Curl Level
0.2” (5 mm) flat curl, measured on a flat surface
Paper Size Change
Manual change of paper size
Side Registration
Adjustment
Mechanical side guides, operator adjusted
Power source
100-240 V, 50-60 Hz, 2 A
Dimensions (H x W x D)
Approximately 41.8” x 35.4” x 26.8” (1,060 mm x 900 mm x 680 mm)
Width expandable to approximately 55” (1,410 mm)
Weight
Lift Unit:
Approximately 157 lb (71 kg)
Docking Unit:
Approximately 11 lb (5 kg)
Temperature Range
59 degrees F to 86 degrees F (15 degrees C to 30 degrees C)
Humidity Range
30% - 80% relative humidity
84 The DFD Interface Kit-A1 and DFD PATH-A1 (H=1002) are required when the High Capacity Stacker-H1
is attached.
91 Media less than 39 lb bond (148 g/m
2
) may be stackable, but is highly sensitive to curl, environmental conditions,
and line speed.
92 Stacking of thinner paper with curl, may cause the paper to jam or not stack properly.
