imagePRESS C910/C810/C710 Customer Expectations Document
Version 5
imagePRESS C910/C810/C710 Customer Expectations Document
Page 122
16.2 PRISMAsync Print Servers Media Characteristics by Media Catalog
Parameters
During the installation of the PRISMAsync Print Server, the initial system settings
and defaults are defined via the Web-based Settings Editor. The Settings Editor is
needed to add new media to the media catalog, adjust the color management
settings, and define color pre-sets.
The table below describes the standard media library characteristics and
parameters when the PRISMAsync Print Server is attached.
Characteristic
Parameter
Name
Set the name of the media.
Type
Set the brand name of the paper.
Size
Select the size of the paper from the drop-down list, including
custom size paper.
Width (0.1 mm)
Specify the width of the custom paper in millimeters or inches.
Length (0.1 mm)
Specify the length of the custom paper in millimeters or inches.
Tab sheet
Select the check box to use tab paper, and then enter the cycle
length (how many tabs in one set).
Insert
Select the check box to use the paper as a sheet insertion, and then
enter the cycle length (how many sheet insertions in a set).
Cycle length
Set the value 1 to N. Where “N” is the number of sheets in one
cycle. Must specify the cycle length when specifying tab sheets or
sheet insertions.
Punch count
Specify how many holes are in the pre-punched paper.
Weight (g/m
2
)
Specify the weight of the paper in g/m
2
or lb.
Color
Specify the color of the paper. This setting acts as an identifier to
display the color of the paper on the operation panel.
RGB color
Specify the RGB color value (0-255) for identification purposes on
the operation panel.
Media family
Specify the media family to which the custom paper belongs (e.g.,
Coated, Uncoated).
Surface type
Specify the type of paper (e.g., Vellum, Coated_1-sided,
Embossed).
Shape
Specify the paper’s shape (e.g., Normal, Envelope, or Letterhead).
