Canon imageFORMULA ScanFront 400, Set Up And Operation Manual

Page: 98 / 108

98
Chapter 6 Troubleshooting
1.
Troubleshooting
If any of the following problems occurs, solve the problem as described in the corresponding solution.
Network settings and other settings
Cannot use an LDAP address
book (certain users only)
Cause
The administrator has restricted the use of the LDAP address book.
Solution Contact the administrator of the ScanFront.
Cannot communicate with
LDAPS, SMTPS, FTPS,
WebDAV over SSL, or other
servers despite properly
configured connection settings
Cause The certificate has not been imported.
Solution Consult the server administrator, and import the appropriate certificate.
Cause
The clock on the ScanFront is out of sync.
Solution Sync the clock.
Cannot access the shared folder
Cause
The clock on the computer on which the shared folder is located and the
clock on the ScanFront are out of sync.
Solution Sync the clocks.
Cannot update the settings
Cause
The ScanFront is being used or a user has not logged out.
Solution Check the ScanFront status and then try again.
Cannot create a new folder
(shared folder/FTP server)
Cause
Permission to write to the shared folder has not been granted for the
user name and password that were entered.
Solution Contact the administrator of the shared folder.
Specifying a mail address as the
address and then starting
scanning results in an error Cause
The mail server settings have not been registered, or have been deleted.
Solution Contact the administrator of the ScanFront.
Cannot edit the address book/
job buttons (certain users only)
Cause
The administrator has restricted editing of the address books/job
buttons.
Solution Contact the administrator of the ScanFront.