Canon imageFORMULA ScanFront 400 Set Up And Operation Manual Download

Page: 60 / 108

Chapter 4 Operating Procedures

❏

Job Button Screen

This screen enables you to select a job button to scan using
the conditions registered to the job button, and then send
the image file. (See “Scanning Procedures” on p. 61.)

Job Button

Opens the Scan / Send Settings screen. (See “Scanning
From the Job Button Screen” on p. 62.)

Jump Keys

Use these keys to find specific Job Buttons when there
are many Job Buttons displayed, for example.

IMPORTANT

• The document is scanned immediately after you press the job

button. Make sure to place your document before you press
the job button. (See “Placing Documents” on p. 41.)

• Register and edit job buttons in the Administrator Settings

screen or the User Settings screen.

• If you are unable to edit a job button, the editing of job buttons

has been restricted by the ScanFront administrator. For
details, contact the administrator.

Summary of Contents for imageFORMULA ScanFront 400













































































































Search results

Summary of Contents for imageFORMULA ScanFront 400

Reviews:

Related manuals for imageFORMULA ScanFront 400

Brands by name

Popular brands

Canon imageFORMULA ScanFront 400, Set Up And Operation Manual

Search results

Summary of Contents for imageFORMULA ScanFront 400

Reviews:

Related manuals for imageFORMULA ScanFront 400

Brands by name

Popular brands