manualshive.com logo in svg

Canon imageFORMULA ScanFront 300, Instructions Manual

The Canon imageFORMULA ScanFront 300 is a high-performance network scanner that simplifies document capture and distribution. With its intuitive touchscreen interface and impressive scanning capabilities, it ensures efficient productivity. Download the free Brochure & Specs manual from our website to unleash the full potential of this exceptional device.

Share
Download
background image

iv

❏

Table of Contents

Introduction............................................................... i

Manuals for the Scanner .......................................... ii
Symbols Used in This Manual .................................. ii
How This Manual is Organized................................ iii

Chapter 1   Before Use

1. Important Safety Instructions............................1-2

Installation Location.............................................. 1-2
Power ................................................................... 1-2
Moving the Scanner.............................................. 1-3
Handling ............................................................... 1-3
About the Fingerprint Sensor 
(ScanFront 300P only).......................................... 1-5
Disposal................................................................ 1-5

2. Features of the ScanFront 300/300P ...............1-6

ScanFront 300/300P............................................. 1-6
ScanFront 300P.................................................... 1-7

3. Names and Functions of Parts .........................1-8

Front and Document Feed and Eject Trays.......... 1-8
Side and Rear....................................................... 1-9

4. Network Environment .....................................1-10

Network Environment ......................................... 1-10
Directory Service Support................................... 1-10
Limitations .......................................................... 1-11

Chapter 2   Handling

1. Documents .......................................................2-2

Plain Paper ........................................................... 2-2
Business Card ...................................................... 2-2
Card...................................................................... 2-3

2. Preparing the Scanner .....................................2-4

Preparing the Document Feed Tray and 
Eject Tray ............................................................. 2-4
Feed Selection Lever............................................ 2-5
USB Port............................................................... 2-5

3. Placing Documents ..........................................2-6

Placing a Document ............................................. 2-6
Placing a Folded Document ................................. 2-7

Placing a Long Document .................................... 2-7
Placing a Card ...................................................... 2-8

4. Clearing a Paper Jam or Double Feed Error.... 2-9
5. Fingerprint Sensor (ScanFront 300P) ............ 2-11

Cautions for Handling the Fingerprint Sensor .... 2-11
Fingerprint Authentication................................... 2-12

Chapter 3   ScanFront Setup

1. Before Setting Up the Scanner ........................ 3-2

Installation Location.............................................. 3-2
Connecting the AC Adapter.................................. 3-3
Connecting the Network Cable............................. 3-3

2. Turning the Power ON and OFF ...................... 3-4

Turning the Power ON.......................................... 3-4
Turning the Power OFF ........................................ 3-4

3. Configuring the Scanner Settings .................... 3-5

Administrator Settings .......................................... 3-5
Web Menu (Administrator Mode).......................... 3-6

4. Configuring Administrator Settings................... 3-8

Logging In to the Administrator Settings............... 3-8
Network Settings .................................................. 3-9
Administrator Password........................................ 3-9
Backup/Restore Setting Information................... 3-10
Select Login Type............................................... 3-10
Roller Counter Reset .......................................... 3-11
Format ScanFront 300........................................ 3-11
Touch Panel Adjustment .................................... 3-11
Display Language Setting................................... 3-12
Network Test ...................................................... 3-12

Chapter 4   ScanFront Service

1. About ScanFront Service ................................. 4-2
2. Installing ScanFront Service ............................ 4-3

System Requirements .......................................... 4-3
Installation ............................................................ 4-3

3. ScanFront Service Setup ................................. 4-6

ScanFront Settings ............................................... 4-6
Changing the Port Number Used for 
Communication..................................................... 4-6

Summary of Contents for imageFORMULA ScanFront 300


































































































































































































Reviews:

No comments

Related manuals for imageFORMULA ScanFront 300

Digital Check TellerScan 220E User Manual preview
TellerScan 220E
Brand: Digital Check Pages: 18
Kodak I810 - Scanner Firmware - PC Installation Planning Manual preview
I810 - Scanner Firmware - PC
Brand: Kodak Pages: 17
Fujitsu Scan Partner 300C Instruction Manual preview
Scan Partner 300C
Brand: Fujitsu Pages: 93
Fujitsu ScanZen Eco Series Installation Manual preview
ScanZen Eco Series
Brand: Fujitsu Pages: 10
Fujitsu SP-1130Ne Operator'S Manual preview
SP-1130Ne
Brand: Fujitsu Pages: 143
Fujitsu SP-1120N Operator'S Manual preview
SP-1120N
Brand: Fujitsu Pages: 147
Ambir DS485 User Manual preview
DS485
Brand: Ambir Pages: 12
IRIS IRIScan Book 3 Quick User Manual preview
IRIScan Book 3
Brand: IRIS Pages: 16
IRIS IRIScan Book 5 Wif Quick User Manual preview
IRIScan Book 5 Wif
Brand: IRIS Pages: 29
Camlink CVACC-G685 User Manual preview
CVACC-G685
Brand: Camlink Pages: 8
Nikon Scan User Manual preview
Scan
Brand: Nikon Pages: 57
CADstar CS.Neo2 Instruction Manual preview
CS.Neo2
Brand: CADstar Pages: 137
Radio Shack RPO-137 User Manual preview
RPO-137
Brand: Radio Shack Pages: 44
NCD Input Scanner RS-232 User Manual preview
Input Scanner RS-232
Brand: NCD Pages: 7
NCR 7702-K168 Instructions Manual preview
7702-K168
Brand: NCR Pages: 8
Baracoda RoadRunners BRR-LA Brochure & Specs preview
RoadRunners BRR-LA
Brand: Baracoda Pages: 2
Baracoda RoadRunner BRR-FS Supplementary Manual preview
RoadRunner BRR-FS
Brand: Baracoda Pages: 44
Canon imagePROGRAF L24e Quick Start Manual preview
imagePROGRAF L24e
Brand: Canon Pages: 4

Brands by name

Popular brands

Load more brands