background image

6-16

Chapter 6   Web Menu (Administrator Mode)

Passive Mode

Uses passive mode to send transmissions to the FTP 
server.

IMPORTANT

Use passive mode when normal communication with the FTP 
server cannot be established. However, be aware that 
communication may not be possible if the network is not 
functioning properly.

[OK] button

Registers a new FTP server with the specified parameters.

Address type: Shared folder

This option registers a folder shared publicly on the 
network.

Name

Enter the name to display on the scanner.

Computer Name (Host Name)

Enter the name of the computer containing the publicly 
shared folder. When the ScanFront Service is running, you 
can enter the IP address instead of a host name.

Folder path

Enter the path to the subfolder that you want to register as 
the name of the shared folder.

[Browse] button

Shows a list of computers connected to the network for 
you to specify a shared folder. 

Hint

You can display the shared folders using the following 
procedure.
1. After entering the computer name, user name, password, 

and domain/workgroup, click [Browse]. Access the computer 
containing the publicly shared folder. Sub-folders on 
computers running Windows 7 or Windows Server 2008 R2 
cannot be browsed by clicking the [Browse] button. In such 
cases, enter the computer name and path up until the top-
most folder of that computer in [Folder path], and then click 
[Browse].

2. Specify any subfolder from the displayed computer and click 

[OK].

IMPORTANT

• If you click [Browse] without entering the user account 

information, only computers and workgroups within the same 
network address will display.

• When displaying workgroups that are not part of a domain, 

you cannot display computers or workgroups with different 
network addresses.

• Not all workgroups and computers in the network can be 

displayed immediately after the ScanFront is started. If some 
workgroups and computers are not displayed, wait a few 
minutes and then press [Browse]. 

• A new folder cannot be created in a specified folder via the 

Web Menu. If you want to create a new folder, use the 
computer set as the FTP server or the address editing 
functions of the ScanFront to create a folder beforehand. 

User name/Password

Enter the user name and password of an account with the 
authority to write data to the shared folder.

Domain/Workgroup

If the computer containing the shared folder is part of a 
domain, enter the domain name.

Summary of Contents for imageFORMULA ScanFront 300


































































































































































































Reviews: