CHAPTER 3 DISASSEMBLY & REASSEMBLY
II. FRONT UNIT
1. Eject Pocket
1) Remove the front unit.
2) Open the eject pocket
{
1
, slide it
horizontally to remove the shafts
{
2
on
both sides from the holes, and then
remove the eject pocket.
Figure 3-201
Note:
Once you have removed the eject
pocket, U-turn roller (follower) can
also be removed. The U-turn roller
can be removed from the fitting parts
by pulling it out.
2. Front Cover
1) Remove the front unit.
2) Remove the eject pocket.
3) Use a tool to unhook the 10 pairs of
fitting parts
{
1
in sequence to spread
open the gap, and then remove the front
cover
{
2
.
Note:
Take care to avoid scratching the
cover with the tool. You should
unhook the bottom fitting part first.
Figure 3-202
Note:
Once you have removed the front
cover, the button
{
1
and eject
support
{
2
can be removed. Take
care to avoid accidentally dropping or
damaging it.
COPYRIGHT
©
CANON ELECTRONICS INC. 2011 CANON DR-C125 FIRST EDITION
3-5
