32
Adjust the Image Quality for Copy
Relation between the density and document type:
If <
Density
> is set to <
Auto Density
>, <
Original Type
> will be changed
to <
Text
>.
Adjusting the density
You can make the density brighter or darker than the original documents.
1
Place your documents (
→
2
Switch to the Copy mode (
→
p.16).
3
Press [
▲
] or [
▼
] to highlight <Density>, and then press [OK].
4
Press [
◄
] or [
►
] to adjust the density , and then press [OK].
•
Select <
Auto Density
> to use the density that is most suitable for the document.
Density
Auto Density
Manual Density
- +
– : Less density (lighter)
+ : More density (darker)
5
Press [
] (Start).
Selecting the Document Type
Select the appropriate document type.
1
Place your documents (
→
2
Switch to the Copy mode (
→
3
Press [
▲
] or [
▼
] to highlight <Original Type>, and then press [OK].
4
Press [
▲
] or [
▼
] to highlight the appropriate document type, and then
press [OK].
<Text>
Best suited for text-only documents.
<Text/Photo (High
Speed)>
Suitable for documents that contain text and photos.
(Scanned documents are at a low resolution at high
speed.)
<Text/Photo>
Suitable for documents that contain text and photos.
<Photo>
Suitable for documents that contain large photos.
5
Press [
] (Start).
