manualshive.com logo in svg

Canon imageCLASS MF4880dw, Basic Operation Manual

Share
Download
Canon imageCLASS MF4880dw Basic Operation Manual Download Page 20

20

 Placing Documents on the Platen Glass

1 

Open the feeder.

2 

Place your document face down.

 

3 

Align the document with the appropriate paper size marks.

• 

If the document does not match any of the paper size marks, align the upper left 
edge of your document with the arrow mark.

• 

If the document is a transparency, place white paper above the document.

 

A5

STMT

B5

A4

LTR

4 

Close the feeder.

 Placing Documents in the Feeder

1 

Open the document feeder tray.

2 

Spread the document guides a little wider than the document’s width. 
When placing large documents, pull out the extension tray.

 

3 

Fan the document stack and align the edges of the pages.

 

Thoroughly fan the 

paper in small batches.

Align the edges a few 

times on a fl at surface.

 CAUTION

When closing the 
feeder, be careful not to 
get your fi ngers caught.

Summary of Contents for imageCLASS MF4880dw





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands