manualshive.com logo in svg

Canon imageCLASS LBP913w, User Manual

Share
Download
Canon imageCLASS LBP913w User Manual Download Page 18

Setting Up

27WS-006

Before using the functions of the machine, the environmental conditions must be set in advance. To begin with, check

the sequences of flow required to complete the setup, and then perform the actual settings.  Preparations Required

Before Use(P. 15) 

●

The functions installed on the machine vary depending on the model you purchased. Before using the
machine, see  Main Functions(P. 14)  and check the available functions.

Configuring Initial Settings of the Machine (Setup Guide)

●

You can easily configure the initial settings required to use the machine, such as date, time, and network
settings, by following the on-screen guidance.  Setting Up Using the Setup Guide(P. 18) 

Setting Up

13

Summary of Contents for imageCLASS LBP913w








































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands