manualshive.com logo in svg

Canon imageCLASS LBP612Cdw, User Manual, Page: 614 / 621

Share
Download
Canon imageCLASS LBP612Cdw User Manual Download Page 614

 

- 22 - 

*    Neither the name of Sparta, Inc nor the names of its contributors may 
      be used to endorse or promote products derived from this software 
      without specific prior written permission. 
   
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS 
IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE ARE DISCLAIMED.    IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR 
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; 
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
 
---- Part 6: Cisco/BUPTNIC copyright notice (BSD) ----- 
 
Copyright (c) 2004, Cisco, Inc and Information Network 
Center of Beijing University of Posts and Telecommunications. 
All rights reserved. 
   
Redistribution and use in source and binary forms, with or without 
modification, are permitted provided that the following conditions are met: 
   
*    Redistributions of source code must retain the above copyright notice, 
      this list of conditions and the following disclaimer. 
   
*    Redistributions in binary form must reproduce the above copyright 
      notice, this list of conditions and the following disclaimer in the 
      documentation and/or other materials provided with the distribution. 
   
*    Neither the name of Cisco, Inc, Beijing University of Posts and 
      Telecommunications, nor the names of their contributors may 
      be used to endorse or promote products derived from this software 
      without specific prior written permission. 
   
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS 

Summary of Contents for imageCLASS LBP612Cdw














































































































































































































































































































































































































































































































































































































































Reviews:

No comments