manualshive.com logo in svg

Canon imageCLASS LBP612Cdw, User Manual, Page: 460 / 621

Share
Download
Canon imageCLASS LBP612Cdw User Manual Download Page 460

Check whether the machine is turned ON.

●

If the machine is turned ON, turn it OFF, and then turn it back ON.

 

 

Check the installation site of the machine and the wireless router.

●

Is the machine too far from the wireless router?

●

Are there any obstacles such as walls between the machine and the wireless router?

●

Are there any appliances such as microwave ovens or digital cordless phones that
emit radio waves near the machine?

 

 

Perform one of the following settings again.

Setting Up Connection Using WPS Push Button Mode(P. 29)
Setting Up Connection Using WPS PIN Code Mode(P. 31)
Setting Up Connection by Selecting a Wireless Router(P. 33)
Setting Up Connection by Specifying Detailed Settings(P. 36)

When you need to manually set up the connection

If the wireless router is set as described below, manually enter all the required information for the wireless LAN

connection (  Setting Up Connection by Specifying Detailed Settings(P. 36) ).

●

ANY connection refusal

*

 is activated.

●

The WEP key that was automatically generated (hexadecimal) is selected.

●

The stealth mode is activated.

 

* 

A function in which the wireless router refuses the connection if the SSID on the device to be connected is set to "ANY"

or is blank.

When you need to change the settings of the wireless router

If the wireless router is set as described below, change the settings of the router.

●

The MAC address packet filtering is set.

●

When only IEEE 802.11n is used for the wireless communication, WEP is selected or the WPA/WPA2
encryption method is set to TKIP.

 

Troubleshooting

454

Summary of Contents for imageCLASS LBP612Cdw














































































































































































































































































































































































































































































































































































































































Reviews:

No comments