manualshive.com logo in svg

Canon imageCLASS LBP612Cdw, User Manual, Page: 473 / 621

Share
Download
Canon imageCLASS LBP612Cdw User Manual Download Page 473

 

Is the print faded or uneven in density depending on the paper type or the

environmental conditions? (LBP654Cdw)

●

Change the setting for <Reduce Toner Flaking>. The improvement effect is stronger with <Mode 2> than
<Mode 1>. First try with <Mode 1>.

<Reduce Toner Flaking>(P. 342)

●

Setting a greater improvement effect may result in curled printouts or slower printing speed.

Are you using the machine in an environment with high humidity?

●

Change the setting for <High Humidity Mode>. Setting this item to <On> may solve the problem.

<High Humidity Mode>(P. 337)

●

If you set to <On> and use the machine in an environment with low humidity, printed images and text may
be blurry.

 

Are you using paper containing much paper dust? (LBP654Cdw)

●

Using  paper  containing  much  paper  dust  may  result  in  a  faded  or  streaky  printout.  Setting  <Corr.  Img.
Corrup. by Ppr Dust> to <On> may solve the problem.

<Corr. Img. Corrup. by Ppr Dust>/<Correct Image Corrupted by Paper Dust>(P. 341)

●

If you set to <On>, the printing speed may be slower.

 

Is the machine installed in an environment where the temperature changes

rapidly and drastically?

●

When the temperature changes rapidly in the environment where the machine is installed, condensation
occurs, which may cause fading or bleeding in images and text. If <Control Condensation> is set to <On>,
condensation inside the machine will be removed. Condensation removal may be performed automatically
due to temperature change.

<Control Condensation>(P. 346)

●

While condensation removal is being performed, printing may not be performed properly and blank paper
may be output.

●

If  you  set  to  <On>,  you  need  to  keep  the  machine  turned  ON  to  maintain  the  effect  of  condensation
removal.

Troubleshooting

467

Summary of Contents for imageCLASS LBP612Cdw














































































































































































































































































































































































































































































































































































































































Reviews:

No comments