Home
/
Canon
/
imageCLASS LBP612Cdw
/
User Manual

Canon imageCLASS LBP612Cdw, User Manual, Page: 492 / 621

Share

Page: 492 / 621

Canon imageCLASS LBP612Cdw User Manual Download Page 492

Available Paper(P. 521)

●

If you print received documents on paper other than A4 or Letter size, some portions of the image may be
missing or the image may be divided and printed onto several sheets.

No reply from the destination.

A network cable may be disconnected, or there may be a problem in a switch.

●

Check the status of the network cables and switches.

No response from the host./No response from host.

The machine is not connected to a network correctly.

●

Check the machine and network settings, and connect again.

Setting Up the Network Environment(P. 23)

Paper jammed.

Paper jams.

●

Remove the jammed paper, and print again (Printing may resume automatically).

Clearing Paper Jams(P. 496)

Paper Settings and Loaded Size Mismatch

The paper size setting on the operation panel does not match the loaded paper size.

●

Match the paper size setting specified in <Paper Settings> and the size of the paper that is actually loaded.

To use the loaded paper

Change the setting of <Paper Settings> to match the loaded paper size.

Specifying Paper Size and Type(P. 144)

●

If printing from a computer, check whether the paper size setting in the printer driver matches the loaded
paper size.

To load paper without changing the settings

Load the paper with the size that is set to <Paper Settings>.

Loading Paper(P. 124)

●

Check that the paper guides in the paper drawer are set in the correct position.

Loading Paper(P. 124)

Troubleshooting

486

«
...
490
491
492
493
494
...
»

Summary of Contents for imageCLASS LBP612Cdw














































































































































































































































































































































































































































































































































































































































Reviews:

No comments