Canon imageCLASS D661 Reference Manual Download Page 53

Page: 53 / 82

5-10

Packaging

Option A-1: Single Box Return

• Repackage the empty cartridge utilizing the wrapper and pulp

mould end-blocks from the new cartridge’s box.

• Place the empty cartridge in the box of your new cartridge.

Seal the box.

Option B: Volume Box Return

We encourage you to use this option as a more efficient way to
ship cartridges.
• Place as many cartridges as possible into one box.

Carefully seal the box with tape;
or

• Call

1-800-OK-CANON

to receive your free eight cartridge

collection box.

Option A-2: Multiple Box Return

We encourage you to use this option as a more efficient way to
ship cartridges.
• Complete Option A-1.
• Bundle multiple cartridge boxes together securely with tape.

Please be sure that the shipment does not exceed UPS specifications.

Maximum weight = 70 pounds

Maximum length = 108 inches
Maximum girth ( 2

width + 2

height) = 130 inches

If your shipment exceeds the above limits, please call

1-800-OK-CANON

for special shipping information.

Please Note:

Do not send

defective cartridges for replacement.

Defective cartridges under warranty should be exchanged by an authorized dealer or service facility as
provided in the warranty.

U.S.A. PROGRAM

Summary of Contents for imageCLASS D661



















































































Search results

Summary of Contents for imageCLASS D661

Reviews:

Related manuals for imageCLASS D661

Brands by name

Popular brands

Canon imageCLASS D661, Reference Manual

Search results

Summary of Contents for imageCLASS D661

Reviews:

Related manuals for imageCLASS D661

Brands by name

Popular brands