Canon IMAGE RUNNER C9075 PRO Operating Manual Download

Page: 205 / 218

List of Error Messages

2-117

Troubleshooting

# 860

Cause 1

A paper jam occurred during printing.

Remedy

Try printing again.

Cause 2

You tried to print on a transparency sheet not made for this machine.

Remedy

Load transparencies made for this machine into the machine, and then try printing again.

# 861

Cause

An error occurred while processing PDL data or image data.

Remedy

Confirm the print settings you made when printing from a computer.

# 862

Cause 1

The saddle finisher trays have exceeded their stacking limits. (See Chapter 16, "Appendix," in

Getting Started.)

Remedy

Change the print data or print settings, and try printing again.

Cause 2

A combination of settings that is not supported was set.

Remedy

Change the print data or print settings, and try printing again.

Cause 3

Data that is not guaranteed to be compatible was printed.

Remedy

Change the print data or print settings, and try printing again.

# 863

Cause

An error occurred while processing PDL data or image data.

Remedy

Check the settings, and try printing again.

# 865

Cause

A function related to performing jobs is restricted.

Remedy

Contact your System Manager.

# 889

Cause

You cannot scan or print the document because it has Scan Lock Information embedded.

Remedy

Check the Scan Lock Information or contact your System Manager.

# 904

Cause

The destination which is registered in [Favorite Settings] cannot be updated even when an address book is acquired from another

imageRUNNER ADVANCE series connected to the network.

Remedy

Summary of Contents for IMAGE RUNNER C9075 PRO



























































































































































































































Search results

Summary of Contents for IMAGE RUNNER C9075 PRO

Reviews:

Related manuals for IMAGE RUNNER C9075 PRO

Brands by name

Popular brands

Canon IMAGE RUNNER C9075 PRO, Operating Manual

Search results

Summary of Contents for IMAGE RUNNER C9075 PRO

Reviews:

Related manuals for IMAGE RUNNER C9075 PRO

Brands by name

Popular brands