Canon IMAGE RUNNER C9075 PRO, Operating Manual

Page: 202 / 218

List of Error Messages
2-114
2
Troubleshooting
# 406
Cause 1 The job failed because the medium was removed from the USB port while the job was in progress.
Remedy Confirm that the medium is properly inserted, and then write the data again.
Cause 2 While data, such as image data, was being transferred to the medium, some error occurred.
Remedy Confirm the status of the medium and the file format.
# 407
Cause 1 The length of the full path to the specified file (or folder) exceeded the supported limit.
Remedy The limit of the length of the full path is 256. Shorten the file name to be written.
Cause 2 The transfer of the image to the USB memory was not properly performed because the length of the full path exceeded the limit.
Remedy 1 The limit of the length of the full path is 256. Shorten the file name to be written.
Remedy 2 Change the folder to which the data is saved.
# 408
Cause 1 The job failed because the medium was removed from the USB port while the read job was in progress.
Remedy Confirm that the medium is inserted, and then read the data again.
Cause 2 While the data, such as image data, was being transferred from the medium, an error occurred.
Remedy Confirm the status of the medium and the file format.
# 701
Cause 1 The specified Department ID does not exist, or the password has changed.
Remedy Enter the correct Department ID or password using - (numeric keys) on the control panel, and try again.
Cause 2 The Department ID or password was changed while the machine was processing a job.
Remedy Change the Department ID and password, and try again. If you do not know the password, contact your System Manager.
Cause 3 <Allow Printer Jobs with Unknown IDs> is set to ‘Off’.
Remedy Set <Allow Printer Jobs with Unknown IDs> to ‘On’. (See e-Manual > Security.)
# 703
Cause The hard disk is full, and no more images can be scanned.
Remedy 1 Wait a few moments, and try scanning again after the current send jobs complete.
Remedy 2 Erase documents stored in the Mail Box and the Fax/I-Fax Inbox. If the machine still does not operate normally, turn the main
power OFF, and then back ON again. (See e-Manual > Before You Start Using This Machine.)
#711
Cause The Mail Box and the Fax/I-Fax Inbox memory is full.
Remedy Erase unnecessary documents stored in the Mail Box and the Fax/I-Fax Inbox. (See e-Manual > Fax/I-Fax Inbox and Access Stored
Files.)
# 712
Cause The maximum number of documents are already stored in the Mail Box and the Fax/I-Fax Inbox.
Remedy Erase unnecessary documents stored in the Mail Box and the Fax/I-Fax Inbox. (See e-Manual > Fax/I-Fax Inbox and Access Stored
Files.)
# 749