manualshive.com logo in svg

Canon i-SENSYS MF229dw, Service Manual, Page: 249 / 308

Share
Download
Canon i-SENSYS MF229dw Service Manual Download Page 249

4

4

4-187

4-187

Disassembly/Assembly > Pickup Feed System (Simplex Model) > Removing the Separation Pad (Simplex Model) > Procedure

Disassembly/Assembly > Pickup Feed System (Simplex Model) > Removing the Separation Pad (Simplex Model) > Procedure

1-1) Open the SADF + Reader Unit [1] and the Delivery Tray [2] (SADF Model).
1-2) Open the Copyboard Cover + Reader Unit [1] and the Delivery Tray [2] (Copyboard 

Model).

2) Remove the Pickup Roller [3].
•  2 Claws [4]

[3]

[4]

[1]

[2]

2x

F-4-552

Removing the Separation Pad (Simplex Model)

 

■

Procedure

CAUTION:

Do not touch the surface of the Separation Pad.

1) Turn the machine so that it is placed with its left side down.
2-1) Hold and open the SADF Unit + Reader Unit [1] (SADF Model).
2-1) Hold and open the Copyboard Unit + Reader Unit [1] (Copyboard Model).

CAUTION:

Turning the machine sideways may release the tension of the hinge of the SADF Unit [2] 
and cause the units to open suddenly.

[2]

F-4-554

F-4-553

Summary of Contents for i-SENSYS MF229dw





















































































































































































































































































































Reviews:

No comments