manualshive.com logo in svg

Canon i-SENSYS MF229dw, Service Manual, Page: 198 / 308

Share
Download
Canon i-SENSYS MF229dw Service Manual Download Page 198

4

4

4-136

4-136

Disassembly/Assembly > Pickup Feed System (Duplex Model) > Removing the Delivery Slave Roller Unit  (Duplex Model) > Procedure

Disassembly/Assembly > Pickup Feed System (Duplex Model) > Removing the Delivery Slave Roller Unit  (Duplex Model) > Procedure

Removing the Delivery Slave Roller Unit 
(Duplex Model)

 

■

Procedure

1-1) Open he DADF Unit + Reader Unit [1] and Delivery Tray [2] (DADF Model).
1-2) Open the SADF Unit + Reader Unit [1] and Delivery Tray [2] (SADF Model).
1-3) Open the Copyboard Cover + Reader Unit [1] and Delivery Tray [2] (Copyboard Model).

[1]

[2]

F-4-391

F-4-392

2) Remove the Delivery Slave Roller Unit [1].
•  2 Shafts [2]

CAUTION:

Do not damage the Delivery Slave Roller Unit [1] by bending it too much.

[1]

F-4-393

Summary of Contents for i-SENSYS MF229dw





















































































































































































































































































































Reviews:

No comments