manualshive.com logo in svg

Canon i-SENSYS MF229dw, Service Manual, Page: 196 / 308

Share
Download
Canon i-SENSYS MF229dw Service Manual Download Page 196

4

4

4-134

4-134

Disassembly/Assembly > Pickup Feed System (Duplex Model) > Removing the Pickup Roller (Duplex Model) > Procedure

Disassembly/Assembly > Pickup Feed System (Duplex Model) > Removing the Pickup Roller (Duplex Model) > Procedure

Removing the Pickup Roller (Duplex Model)

 

■

Procedure

CAUTION:

•  Do not touch the surface of the Pickup Roller.
•  Do not touch the Transfer Roller [1].

[1]

F-4-385

F-4-384

1-1) Open he DADF Unit + Reader Unit [1] and Delivery Tray [2] (DADF Model).
1-2) Open the SADF Unit + Reader Unit [1] and Delivery Tray [2] (SADF Model).
1-3) Open the Copyboard Cover + Reader Unit [1] and Delivery Tray [2] (Copyboard Model).
2) Remove the Pickup Roller [3].
•  2 Claws [4]

[3]

[4]

[1]

[2]

2x

F-4-386

Summary of Contents for i-SENSYS MF229dw





















































































































































































































































































































Reviews:

No comments