manualshive.com logo in svg

Canon i-SENSYS MF229dw, Service Manual, Page: 235 / 308

Share
Download
Canon i-SENSYS MF229dw Service Manual Download Page 235

4

4

4-173

4-173

Disassembly/Assembly > Image Formation System (Simplex Model) > Removing the Transfer Roller (Simplex Model) > Procedure

Disassembly/Assembly > Image Formation System (Simplex Model) > Removing the Transfer Roller (Simplex Model) > Procedure

Image Formation System (Simplex Model)

Layout Drawing

[1]

No.

Name

Reference

Remarks

[1]

Transfer Roller

(Refer to page 4-173)

F-4-509

T-4-51

Removing the Transfer Roller (Simplex Model)

 

■

Procedure

CAUTION:

Do not touch the surface of the Transfer Roller.

1-1) Open the SADF Unit + Reader Unit [1] and Delivery Tray [2] (SADF Model).
1-2) Open the Copyboard Cover + Reader Unit 1] and Delivery Tray [2] (Copyboard Model).
2) Remove the bushing [3] of the Transfer Roller.
•  2 Claws [4]

[1]

[2]

2x

[1]

[4]

[3]

[4]

F-4-510

F-4-511

Summary of Contents for i-SENSYS MF229dw





















































































































































































































































































































Reviews:

No comments