manualshive.com logo in svg

Canon GX6040, Online Manual

The Canon GX6040 online manual is the ultimate resource for users seeking comprehensive information on their product. Offering easy access and hassle-free navigation, this free manual download provides step-by-step instructions, troubleshooting advice, and essential tips. Enhance your Canon GX6040 experience today by visiting manualshive.com for a quick and convenient download.

Share
Download
background image

Using Touch Screen

The HOME screen on the touch screen appears when the printer is turned on.

Touch the HOME screen on the touch screen with your finger tip to select menus for copying, scanning, and
other functions.

HOME Screen
Basic Operation of the touch screen

HOME Screen

The HOME screen consists of the two screens.

The screen can be switched by flicking left or right.

A: Basic menu

Select to copy or scan using the operation panel. After selecting a basic menu, the particular menus
are displayed.

B: Network

Displays the current network status. Select to display the basic network information or to change the
network settings.

The icon differs depending on the network of use or the network status.

 Wi-Fi is enabled and the printer is connected to the wireless router.

Note

• Depending on the signal state, the icon will change.

 (Signal strength: 81 % or more): You can use the printer over Wi-Fi without any problems.

 (Signal strength: 51 % or more): The problem such as the printer cannot print may occur

according to the network status. We recommend placing the printer near the wireless router.

175

Summary of Contents for GX6040




















































































































































































































































































































































































































Reviews:

No comments

Related manuals for GX6040

Canon Color imageCLASS MF8580Cdw User Manual preview
Color imageCLASS MF8580Cdw
Brand: Canon Pages: 750
Canon ImageCLASS 2300 Setup Sheet preview
ImageCLASS 2300
Brand: Canon Pages: 8
Canon Color imageCLASS MF8580Cdw Manual preview
Color imageCLASS MF8580Cdw
Brand: Canon Pages: 750
Canon Color imageCLASS 8180c Facsimile Manual preview
Color imageCLASS 8180c
Brand: Canon Pages: 95
Canon GP200 Installation Instructions preview
GP200
Brand: Canon Pages: 4
Canon CFX-B380 IF Parts List preview
CFX-B380 IF
Brand: Canon Pages: 49
Canon ImageCLASS 2300 Basic Manual preview
ImageCLASS 2300
Brand: Canon Pages: 156
Canon FaxPhone L90 Reference Manual preview
FaxPhone L90
Brand: Canon Pages: 193
QMS 3225 Tray Module Installation Manual preview
3225
Brand: QMS Pages: 24
Canon imageCLASS D1120 User Manual preview
imageCLASS D1120
Brand: Canon Pages: 36
Canon ImageCLASS 2300 Remote Ui Manual preview
ImageCLASS 2300
Brand: Canon Pages: 44
Canon FAXPHONE L75 Software User'S Manual preview
FAXPHONE L75
Brand: Canon Pages: 66
DataCard C3000 Datasheet preview
C3000
Brand: DataCard Pages: 2
Panasonic DP-CL21 Series Operating Instructions Manual preview
DP-CL21 Series
Brand: Panasonic Pages: 9
Panasonic DP-CL21 Series Specifications preview
DP-CL21 Series
Brand: Panasonic Pages: 2
Oki OKIPAGE14e Setup Manual preview
OKIPAGE14e
Brand: Oki Pages: 28
Oki OKIPAGE14e Limited Warranty preview
OKIPAGE14e
Brand: Oki Pages: 22
Canon image RUNNER 3045 Manual preview
image RUNNER 3045
Brand: Canon Pages: 14

Brands by name

Popular brands

Load more brands