Canon GX6040 Online Manual Download Page 329

Page: 329 / 403

Lines Are Misaligned/Distorted

Check1

Check paper and print quality settings.

Check2

Perform print head alignment.

If printed lines are misaligned/distorted or print results are otherwise unsatisfactory, adjust the print head
position.

Aligning the Print Head

Note

• If the problem is not resolved after performing the print head alignment, perform print head alignment

manually.

Aligning the Print Head Manually

Check3

Increase print quality and try printing again.

Increasing the print quality using the operation panel or the printer driver may improve the print result.

329

Summary of Contents for GX6040




















































































































































































































































































































































































































Search results

Summary of Contents for GX6040

Reviews:

Related manuals for GX6040

Brands by name

Popular brands

Canon GX6040, Online Manual

Search results

Summary of Contents for GX6040

Reviews:

Related manuals for GX6040

Brands by name

Popular brands