Canon GX6040 Online Manual Download Page 327

Page: 327 / 403

Refer to the instruction manual supplied with the paper for detailed information on the printable side.

•

When copying, see also the sections below:

Check5

Is platen glass dirty?

Clean the platen glass.

Cleaning Platen and Document Cover

Check6

Make sure original is properly loaded on platen.

When you load the original on the platen, load it with the side to be copied facing down.

Loading Originals

Check7

Is copy source a printed paper by printer?

If you use a printout done by this printer as the original, print quality may be reduced depending on the condition
of the original.

Reprint from the computer if you can reprint from it.

Note

• Although some air may enter the ink tube, it is not a malfunction. No problem if the nozzle check pattern

is printed correctly.

327

Summary of Contents for GX6040




















































































































































































































































































































































































































Search results

Summary of Contents for GX6040

Reviews:

Related manuals for GX6040

Brands by name

Popular brands

Canon GX6040, Online Manual

Search results

Summary of Contents for GX6040

Reviews:

Related manuals for GX6040

Brands by name

Popular brands