![background image](http://html.mh-extra.com/html/canon/finisjer-e1/finisjer-e1_service-manual_62314130.webp)
CHAPTER 5 TROUBLESHOOTING
COPYRIGHT © 1999 CANON INC. CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
5-6
D.
Adjust the Tension of the
Stack Processing Motor
Belt
1) Remove the inside right cover and the rear
cover. (Figure 3-103)
2) Using 64 g/m
2
paper, prepare a sheet of
about 10 x 200 mm; then, fold it in four.
3) Turn the motor spindle [1] so that the
sheet [4] is between the belt [2] and the
tension roller [3].
50mm
10mm
Figure 5-113
Figure 5-114
[2]
[1]
[3]
[4]