![background image](http://html.mh-extra.com/html/canon/finisjer-e1/finisjer-e1_service-manual_62314117.webp)
CHAPTER 3 MECHANICAL SYSTEM
COPYRIGHT © 1999 CANON INC. CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
3-35
VII.STAPLER
A.
Removing the Stapler
1) Remove the inside right cover and the
stapler cover. (Figure 3-103)
2) Disconnect the connector J8 [1] of the
finisher controller PCB [2].
3) Remove the two mounting screws [3], and
detach the stapler [4].
Figure 3-619
[3]
[4]
[3]
[2]
[1]