![background image](http://html.mh-extra.com/html/canon/finisjer-e1/finisjer-e1_service-manual_62314125.webp)
CHAPTER 5 TROUBLESHOOTING
COPYRIGHT © 1999 CANON INC. CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
5-1
I.
ADJUSTMENTS
A.
Adjusting the Jogging
Plate Width
1) Remove the front jogging plate and the
rear cover. (Figure 3-103)
2) Adjust the front jogging plate to the home
position.
2-1) Set DSW1 on the finisher controller PCB
as shown in Figure 5-101.
2-2) Press SW1 on the finisher controller
PCB.
•
The front jogging plate moves to the
home position.
3) Adjust the rear jogging plate to the home
position.
3-1) Set DSW1 on the finisher controller PCB
as shown in Figure 5-102.
3-2) Press SW1 on the finisher controller
PCB.
•
The rear jogging plate moves to the
home position.
1
O
F
F
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
O
F
F
Figure 5-101
Figure 5-102
Figure 5-103
Rear jogging plate home position