![background image](http://html.mh-extra.com/html/canon/finisjer-e1/finisjer-e1_service-manual_62314112.webp)
CHAPTER 3 MECHANICAL SYSTEM
COPYRIGHT © 1999 CANON INC. CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
3-30
B.
Removing the Stack Tray
Drive Unit
1) Remove the inside right cover and the rear
cover. (Figure 3-103)
2) Remove the stapler cover.
3) Remove the mounting screw [1], and
detach the stack tray lifter motor clock
sensor support plate [2].
4) Remove the three mounting screws [3],
and disconnect the connector [4]; then,
detach the stack tray drive unit [5].
Figure 3-610
Figure 3-611
[2]
[1]
[3]
[5]
[3]
[4]