![background image](http://html.mh-extra.com/html/canon/finisjer-e1/finisjer-e1_service-manual_62314114.webp)
CHAPTER 3 MECHANICAL SYSTEM
COPYRIGHT © 1999 CANON INC. CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
3-32
D.
Releasing the Stack Tray
Guide Lever Fixing Plate
1) Remove the inside right cover and the rear
cover. (Figure 3-103)
2) Remove the stapler cover.
3) Remove the stack tray. (Figure 3-501)
4) Rotate the clock plate of the tray shift
motor so that the stack tray guide lever
fixing plate [1] is in view through the hole
in the side plate (front, rear; clockwise to
lower and counterclockwise to raise it);
then, remove the fixing screw [2], and free
the hook of the fixing plate from the stack
tray guide lever [3]. (Perform the same for
the front and the rear.)
Caution:
When removing the mounting screw [2], be
sure to hold down the stack tray guide lever
from above.
Figure 3-614
Figure 3-615
[1]
[2]
[3]
Stack tray lever