Canon FAX-L2000, Reference Manual, Page: 97 / 212

Using the MP Tray 2-21
2
Gett
ing Started
IMPORTANT
• Make sure that the leading edge of the paper is inserted all the way into the MP tray until
it stops so that it is below the paper feed roller. The paper sensor for the MP tray is
located to the right of the paper feed roller, when viewed from the front of the machine.
• Please note the following points when loading small size paper:
- If the paper is not loaded correctly, the paper is not detected by the machine, and a
message appears asking you to load paper into the MP tray.
- Make sure that the paper stack is not higher than the load limit guides on the paper
guides.
- Make sure that the paper guides are set correctly. To print with the MP tray, you also
need to select the paper size in the MP TRAY menu. (See Chapter 5, “Summary of
Important Settings.”)
- Make sure that the paper is loaded correctly, and that the leading edge is fully inserted
into the main unit.
Paper Feed Roller
Paper Sensor
Load Limit Guide